HighPoint RocketRAID 2322 - Manual (Page 12)

RocketRAID 2322 Hardware Description/Installation
2 - Installing the RocketRAID 2322 Host Adapter
Note: Make sure the system is powered-off before installing the RocketRAID 2322
host adapter.
1. Open the system chassis and locate an unused PCI-Express slot.
2. Remove the PCI slot cover.
3. Gently insert the RocketRAID 2322 into the PCI-Express slot, and secure the
bracket to the system chassis.
4. After installing the adapter, attach hard disks to the RocketRAID 2322 using the
Mini-SAS data cables. SATA cables have universal connections – either end
can be attached to the adapter or hard disk. Each RocketRAID 2322 included
two Mini-SAS cables, and supports up to eight separate hard disks drives (4
disks per cable).
2-2