HighPoint RocketRAID 2314 - Manual (Page 45)

RocketRAID 231x Driver and Software Installation
Connection:
1. Highlight the “File” menu, and select the “Remote Control” function.
2. Click the Add button on the toolbar or select the “Add” command from the “Opera-
tion” menu.
3. Enter the system address, name, and port information in the popup window.
The system address can be a host name, or an IP address. The default system port is
7402.
4. Click “OK” to finish adding the new connection.
Modify a Connection
This command modifies connection information for a remote system. To modify a
connection:
1. Highlight the “File” menu and select the “Remote Control” function.
2. Highlight the system you want to modify.
Click the Modify button on the toolbar or select the “Modify” command from the
“Operation” menu.
4-18