HighPoint RocketRAID 2314 User Manual
Page 79
Mac OSX Driver and RAID Management Software
3)
Choose the array type you want to create from the drop-down list.
4)
Enter a name for the array (this is optional)
5)
If you are creating a redundant RAID array (RAID1, 5, 10), select an initialization
option for the array.
Note: An un-initialized RAID1 or RAID10 array can still provide redundancy in case of
a disk failure. A RAID5 array, however, is not fault-tolerant until initialization is
finished.
6)
If you are creating RAID5, specify a cache policy for the array:
Write-back
When the write-back setting is selected, writes to the array are cached. This will result
in higher performance, but data loss may occur in case of a power failure.
Write-through
When the write-through setting is selected, writes to the array are always passed
directly to the disks. Subsequent reads may still be completed from the cache, if
appropriate.
7-4