Red Lion TSC - Manual (Page 48)

Timed Event Output(s) (Pn 1 to Pn 16) (Cont’d)
It is possible to have the Event Outputs operate during
profile phases by creating ‘phantom’ phases, whose sole
function is to allow a new state of Event Outputs.
Each profile corresponds to a Timed Event Output.
The Event Output(s) may be manually reset to the off
state at any time during profile execution. A timed event
output may be reset via the user input (if programmed), the
front panel buttons (in the hidden mode), or the RS-485
serial communication option. Once reset they remain in that
state until the profile advances to the next phase and the
event output updates.
-46-
TIMED EVENT OUTPUT(S)
Phase Timed Event Output
Number State
Pnr1 Pn 1 1N2F
PnH1 Pn 2 1N2N
Pnr2 Pn 3 1F2N
PnH2 Pn 4 1F2F
Pnr3 Pn 5 1F2F
PnH3 Pn 6 1N2F