Red Lion TSC - Manual (Page 70)

ON/OFF CONTROL
ON/OFF and PID control can be used for the heat and cool output in several
combinations. The following lists the valid control modes:
OP1 & OP2 VALID CONTROL MODES
OP1 MODE OP2 MODE MANUAL MODE OUTPUT
POWER RANGE
OP1 STATE OP2 STATE
PID 0% to +100.0% OP1-TP
ON/OFF
(PrOP=0.0)
+100.0% OP1-ON
Any other setting OP1-OFF
PID PID -100.0% to +100.0% OP1-TP OP2-TP
PID
(GAN2=0.0)
ON/OFF 0% to +100.0% OP1-TP OP2-OFF
-100.0% to 0% OP1-TP OP2-ON
ON/OFF
(PrOP=0.0)
ON/OFF
(GAN2=0.0)
+100.0% OP1-ON OP2-OFF
-100.0% OP1-OFF OP2-ON
Any other settings OP1-OFF OP2-OFF
TP - Time Proportioning
Note: In manual mode, the % output power is not limited to the output power limits
(OPLO & OPHI).
-68-