ARI Armaturen RI21 EN - Manual (Page 13)

Rev. 0040602000 1014 Page 2-13
Operating and installation instructions 
Electronic position indicator RI21
5.8 Connection in ARI-PREMIO (description)
Also refer to ARI-PREMIO operating instructions
Power input for connection in ARI-PREMIO
The voltage supply is connected to terminals N and L in accordance with type identification
plate.
Actuating signal output for connection in ARI-PREMIO
The actuating signal output ...20 mA is connected to terminals Y
i
and .
The actuating signal output ...10 V is connected to terminals Y
u
and .
ATTENTION !
Only one actuating signal output may be connected at any one time.
Potentiometer input for connection in ARI-PREMIO
ATTENTION !
When installing the potentiometer, observe the operating instructions for the
electrical linear actuator ARI-PREMIO.
Plug connector R
a
, R
b
, R
c
from potentiometer cable into electronic position indicator RI21
and connector 25, 26, 27 into ARI-PREMIO pin block.