AT&T CL84200 - Manual (Page 22)

16
Handset settings
6. Press q CID or pDIR to select the day then press
MENU
/SELECT, or enter the number using the dial pad keys.
7. Press q CID or pDIR to select the year then press
MENU
/SELECT, or enter the number using the dial pad keys,
then press
MENU
/SELECT to confirm.
8. Press q CID or pDIR to select the hour then press
MENU
/SELECT, or enter the number using the dial pad keys.
9. Press q CID or pDIR to select the minute then press
MENU
/SELECT, or enter the number using the dial pad keys.
10. Press q CID or pDIR to select AM or PM, then press
MENU
/SELECT to confirm. There is a confirmation tone.
Press OFF/
CLEAR
to cancel.
NOTE: If the clock is not set when a message is recorded, the system announces, “Time and
day not set,” before it plays the message.
Use caller ID to automatically set date and time
You can choose if the date and time are automatically set by incoming
caller ID. The default setting is
On.
1. When the handset is in idle mode, press MENU/
SELECT
to
enter the main menu.
2. Press q CID or pDIR to scroll to >Settings, then press
MENU
/SELECT.
3. Press q CID or pDIR to scroll to >Set date/time, then
press
MENU
/SELECT.
4. Press q CID or pDIR to scroll to >CID time sync, then
press
MENU
/SELECT.
5. Press q CID or pDIR to select On or Off, then press
MENU
/SELECT to confirm. There is a confirmation tone.
SET DATE
--/--/--
SET TIME
--:-- --
CID TIME SYNC
> On
Date & time
>CID time sync
> Settings
Website
Telephone settings