AT&T CL84200 - Manual (Page 45)

39
Intercom
Use the intercom feature for conversations between handsets. You can buy
additional expansion handsets (model AT&T CL80100) for this telephone
base. You can register up to 12 handsets to the telephone base.
The first nine handset that you register are named
HANDSET 1-9. Use the
handset number to initiate intercom and transfer calls.
Although the names for handsets 10-12 appear in their displays as 10-12,
when you intercom or transfer to one of them, you must use
*0 for
HANDSET 10, *1 for HANDSET 11, and *2 for HANDSET 12.
Using a cordless handset:
1. Press
INT on your handset when not in use.
If you have a single handset system, your handset
screen shows
Calling base. The telephone base rings
and its screen shows HANDSET is calling.
If you have more than one handset, your screen shows
INTERCOM TO: Use the dial pad keys to eenter a
handset number. Your handset screen shows
Calling HANDSET X. The called handset rings and its
screen shows
HANDSET X is calling.
-OR-
Enter
0 to intercom with the telephone base. The screen shows CALLING
BASE. The telephone base rings and its screen shows HANDSET X is calling.
2. To answer the intercom call, press PHONE/
FLASH
, INT,
/SPEA�ER SPEA�ER or any dial pad keys (0-9, TONE , #) on the
called handset. Both handsets now show Intercom.
-OR-
Press
SPEA�ER , INTERCOM or any dial pad keys (0-9,
TONE , #) on the telephone base, or lift the corded handset
to answer the intercom call.
3. To end the intercom call, press OFF/
CLEAR
or INT on
either handset, or place the handset back in the charger.
Both handsets display
Intercom ended.
-OR-
Press
INTERCOM or CANCEL on the telephone base if you are using
speakerphone mode, or return the corded handset to the telephone base.
NOTES:
1. Before the intercom call is answered, you can cancel the intercom call by pressing
OFF/
CLEAR
or INT on the calling handset.
2. If the called handset is not answered within 100 seconds, or if it is in the directory or call log
mode, or is on a call, or is out of range, the calling handset shows Unable to call. Try again.
3. Pressing OFF/
CLEAR
or MUTE/
DELETE
on the cordless handset, or press CANCEL or MUTE
on the telephone base temporarily silences the intercom ringer.
4. Only two handsets can be on an intercom call at a time.
•
•
Multiple handset use
Calling
base
HANDSET
is calling
Intercom
11:35 AM 12/02
Intercom ended
11:45 AM 12/02