AT&T CL84200 - Manual (Page 41)

35
Volume control
On a cordless handset:
While on a call, press
qCID /-VOLUME to decrease or press pDIR /VOLUME+
to increase the listening volume. You can set the listening volume to one of
five levels.
On the telephone base:
While on a call, press qp
/VOLUME to increase or decrease the listening volume.
NOTES:
1. Handset and speakerphone volume settings are independent.
2. When the volume reaches the minimum or maximum setting, you hear two beeps.
Call waiting
If you subscribe to call waiting service from your telephone service provider,
you hear two beeps if someone calls while you are already on a call. Press
PHONE/
FLASH on the cordless handset or press FLASH on the telephone
base to put your current call on hold and take the new call. You can press
PHONE/
FLASH on the cordless handset or press FLASH on the telephone
base at any time to switch back and forth between the calls.
NOTE: Unanswered call waiting calls are not displayed as missed calls on the handset.
Mute
While on a call, use the mute function to turn off the microphone. You can
hear the caller, but the caller does not hear you.
To mute a call on a cordless handset:
• Press
MUTE/
DELETE
. When mute is on, the handset screen
shows Muted for a few seconds and the MUTE icon
displays until you turn off mute.
To end mute a call on a cordless handset:
• Press
MUTE/
DELETE
again. When mute is off, Microphone ON
appears temporarily on the handset screen.
To mute a call on the telephone base:
• Press
MUTE. When mute is on, the screen shows Muted for
a few seconds and the MUTE button turns red until
you turn off mute.
Options while on calls
Telephone operation
Muted
3:58
PM
11/30
Muted
3:54
PM
11/30
MUTE
3:58
PM
11/30
Microphone ON