High Country Tek HFS-3 - Manual (Page 2)

Hydraulic Fan System Controller – HFS-3-12v
This product has been designed by High Country Tek, Inc ( HCT ) to interface directly with any manufacturers
range of proportional pressure and/or flow control valves, variable pumps, motors and manifold blocks currently
available for this type of system.
Please contact the factory by the e-mail address given below or nearest High Country Tek, Inc. distributor for
further technical information and availability.
• Controller Module with DIN 43650 connector :-………………………………………….….P/No: HFS-3-12v
• Controller info manual:-……………………………………………………..……….……..…………P/No: HFS-3-12v RevC
IMPORTANT NOTE:-
High Country Tek, Inc. reserves the right to upgrade, revise or better any controller as technology improves without
notice being given.
Wherever possible, full downwards compatibility for both hardware and software on replaced controllers will be
maintained but it is the users responsibility to ensure that the latest technical details or literature is being used for
application reference.
If you are unsure of the literature, hardware or software revisions you have, or suspect that it is an older revision,
please send an e-mail request for the latest releases to [email protected]
ALL information contained herein is copyrighted to High Country Tek, Inc - © 2009.
• ON and OFF road application suitability
• OEM, re-power and retro-fit markets
• Mining equipment – above and below ground
• Drill, exploration and blast hole rigs
• Chassis, bus and RV builders
• Static applications – standby generators
• Industrial cooling operations
• Liquid nitrogen/oxygen temperature conditioning • Hydraulic system oil
• Automatic Transmission fluid
• Engine sump oil
• Air conditioner refrigerant
• Engine water jacket
• Engine charge air
• ‘External Attachment’ system fluids
• Diesel fuel conditioning
Important Notes :
Application Areas:
System Part Numbers:
2