Videoswitch Vi-Q4C1 - Manual (Page 12)

Video Processor
• Use the number keys 9 and 0 to select the Date/Time and Unit title
• Use
the up, down, left and right keys to move the selected title to the desired
location on the screen.
• Note that the down key moves the title down by 8 steps whilst up moves it up by
just 1 step. This arrangement allows fine control of the vertical position without
requiring too many key presses.
• Use
DEFAULT to restore the factory defaults of the selected screen format
• Repeat for other cameras
• Press
ESC to exit this screen back to the menu
Field X range Y range
Camera Title 0 to 57 0 to 144
Unit Title 0 to 57 0 to 144
Date/Time 0 to 57 0 to 144
• The coordinate X=0, Y=0 represents the top-left of the image.
• X-coordinates refer to the horizontal, larger numbers being further to the right
• Y-coordinates refer to the vertical, larger numbers being further to the bottom
3.3.4 Selectable Formats
Screen formats may be selected from the keypad by pressing the number keys or the left
and right keys. This menu option allows you to specify which formats you want to be able to
select.
• Use left and right to move choose the format
• Use up and down to specify whether you want the format to be selectable from the
keypad or not. A solid block indicates a format can be selected whereas a dash
indicates that it cannot.
3.3.5 Text Background
You can choose whether the text is surrounded by a solid block of black or blue background
colour or just a thin border (to ensure the text can be ready whatever the colour of the video
image).
3.3.6 Image Borders
Each camera image may be surrounded by a black or white border, or no border.
3.3.7 Titles
3.3.7.1 Unit Title
The Video Processor may be given a unit title that is displayed on the screen at all times.
• Use
left and right to move the cursor
• Use
up and down to select the character
8