Videoswitch Vi-Q4C1 - Manual (Page 13)

Video Processor
• Use
DEFAULT to default or clear the title
3.3.7.2 Camera1 Title
Each camera may be given a title that is displayed on the screen whenever that camera
image is displayed.
• Use
left and right to move the cursor
• Use
up and down to select the character
• Use
DEFAULT to default or clear the title
3.3.7.3 Camera2 Title
See above
3.3.7.4 Camera3 Title
See above
3.3.7.5 Camera4 Title
See above
3.4 ALARMS
3.4.1 Pull Up
This setting determines whether an alarm input 1, 2, 3 or 4 will cause formats 1, 2, 3 or 4
respectively to be called up.
3.4.2 Relay Time
When an alarm occurs the relay operates. This option specifies for how the relays remains
active after the alarm condition has ceased.
3.4.3 Video Loss Mask
This mask determines which input are monitored for video loss.
• Use
left and right to move the cursor
• Use
up and down to select whether the input is to be monitored for video loss. A
solid block indicates that monitoring is ON. A dash indicates that monitoring is OFF.
• Use
DEFAULT to default the monitoring settings to all on or all off.
9