3 vi-alm1a alarm module, 1 alarm inputs/outputs, 2 physical and environmental – Videoswitch CMOR D3 Dome User Manual
Page 26: 4 brackets and cables, 1 vi-b2 wall bracket, 2 vi-b5 corner adaptor, 3 vi-b4 swan-neck bracket, 4 vi-b3 pendant bracket, 5 vi-b6 pole mount bracket, 6 vi-b7 dome adaptor
CMOR Dome
Videoswitch Page
22
Vc607a.doc
5.3 Vi-ALM1A Alarm Module
5.3.1 Alarm
Inputs/Outputs
16 inputs, suit normally open or normally closed triggers
1 change over relay output for signally to DVR
5.3.2 Physical
and Environmental
Environmental
IP66 when fitted in PSU)
5.4 Brackets and Cables
5.4.1 Vi-B2
Wall
bracket
5.4.2 Vi-B5 Corner adaptor
5.4.3 Vi-B4 Swan-neck bracket
5.4.4 Vi-B3 Pendant bracket
5.4.5 Vi-B6 Pole mount bracket
5.4.6 Vi-B7 Dome adaptor
5.4.7 Vi-B8 Ceiling Mount Kit
5.4.8 Cables
Longer 10metres cable are available where longer runs are required.
5.5 CE Marking
This product is CE marked. It has been fully tested and complies with 89/336/EEC
Electromagnetic Compatibility and 73/23/EEC Low Voltage directives, and with EN
60950:2000 safety standards.
Warning: This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.