5 fitting the bracket cover, 2 vi-b4 pendant bracket, 3 vi-b4 swan-neck bracket – Videoswitch CMOR D3 Dome User Manual
Page 7: Fitting the bracket cover, Vi-b4 pendant bracket, Vi-b4 swan-neck bracket, Cmor dome
CMOR Dome
Videoswitch Page
3
Vc607a.doc
1.1.5 Fitting the bracket cover
• Locate the two plastic sides of the cover on the metal support bracket
• Fix together with the supplied screw using the supplied Allen key
1.2 Vi-B4 Pendant Bracket
The pendant bracket allows the dome to be mounted under a horizontal surface such as a
ceiling.
• Secure the mounting end of the pendant bracket to the ceiling.
• Make sure the protective cup is in place on the pole
• Securely attach the mounting bracket using the screws provided.
• Then attach the dome and umbilical cable in the same was as described in previous
• Slide down the protective cup.
1.3 Vi-B4 Swan-Neck Bracket
The swan-neck bracket allows the dome to be mounted above a horizontal surface such as
a roof, pillar top or other horizontal surface.
• Secure the mounting end of the swan-neck bracket to the surface.
• Make sure the protective cup is in place on the pole.
• Securely attach the mounting bracket using the screws provided.
• Attach the dome and umbilical cable in the same was as described in previous
• Slide down the protective cup.