Kenwood KDC-U7056BT - Manual (Page 18)

18 | Quick Start Guide
Installing the Digital radio antenna
Installation overview
Antenna cable (3.5 m)
Accessory 67
• The antenna should be installed on the
passenger side for safety.
• Use cord clamper (Accessory 8) to
secure the antenna to the pillar at several
locations.
• The direction of the antenna film
(Accessory 6) changes depending on
whether the film antenna is installed on
the right side or left side.
• Separate the antenna film (Accessory 6)
from the ceramic line (black part) at the
top of the front glass by 150 mm.
Also, place it about 70 mm inside the
ceramic line at the side end of the front
glass. (where the earth sheet of the
amplifier can be pasted on the metal part
of the front pillar)
• Separate from other antennas by at least
100 mm.
• Do not paste the amplifier (Accessory 7)
on the ceramic line (black part) around
the front glass. Because there is not
enough adhesion.
Determining the antenna
installation location
• When installing the antenna on the
left side
Accessory 7
Accessory 6
70 mm*
150 mm
Front pillar
Earth sheet
• When installing the antenna on the
right side
Accessory 6
Accessory 7
70 mm*
150 mm
Front pillar
Earth sheet
* Where the earth sheet of amplifier unit
(Accessory 7) can be pasted on the metal
part of the front pillar.
KDC-U7056DAB only
B59-2188-10_01_13Stepup_QSG_M_En.indd 18 13/06/04 13:37