Kenwood KDC-U7056BT - Manual (Page 5)

English | 5
[
1/6]
Preparations
Adjusting the clock
1
Press [Control] knob to enter the
Function setting mode.
The item can be selected and
determined as follows.
”Settings”
Á “Clock & Date” Á “Clock
Adjust”
Turn [Control] knob to select the item,
and press [Control] knob.
2
Turn [Control] knob to adjust the hour,
and then press [Control] knob.
3
Turn [Control] knob to adjust the
minute, and then press [Control] knob.
4
Press and hold [ 1/6] to exits the
Function setting mode.
Detaching/ Attaching the faceplate
Press the
Release button.
!
• Remove the faceplate at once after
pressing the Release button; otherwise it
can fall down due to vibration.
• The faceplate is a precision component of
the unit and can be damaged by shocks
or jolts.
• Keep the faceplate in its case while
detached.
• Do not place the faceplate (and case) in
areas exposed to direct sunlight, excessive
heat or humidity. Also avoid places with
too much dust or the possibility of water
splashing.
Release
[Control] knob (Volume knob)
B59-2188-10_01_13Stepup_QSG_M_En.indd 5 13/06/04 13:36