Kenwood DNX691HD - Manual (Page 12)

11
Return to the Top page
Basic Operations
Initial setup
Perform this setup when you use this unit first time or when you reset the unit (P.127) .
Set each item as follows.
Locale
Select the country for the navigation system.
The language, the distance unit, and the gasoline unit are set.
After setting, touch [Enter].
1
Touch [SET].
2 Select the desired country.
3 Touch [Enter].
Language
Select the language used for the control screen and setting items. Default is “American English (en)”.
1
Touch [SET].
2 Touch [ 2] or [3] to select the desired language.
3 Touch [Enter].
For detailed operation, see Language setup (P.97) .
Angle
Adjust the position of the monitor. Default is “0”.
1
Touch [SET].
2 Touch desired angle number and [ 6].
For detailed operation, see Monitor angle control (P.100) .
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1
Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [ 6].
For detailed operation, see Panel color coordinate (P.101) .
1
Continued