Kenwood DNX691HD - Manual (Page 86)

85
Return to the Top page
Bluetooth Control
Registering the Bluetooth Unit
1
Touch [Search].
Searched Device List screen appears.
NOTE
• You cannot register the Bluetooth unit when you
are using the following sources:
iPod, Bluetooth Audio, APPS, iHeart, Pandora
If you want to register the Bluetooth unit while
using one of the above mentioned sources, send
the connection request from the Bluetooth unit
and register it.
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See
Connecting the Bluetooth unit
(P.85) .
• The Searched Device List screen cannot be
displayed, when the receiving source is Pandora,
iHeartRadio, or Bluetooth Audio.
• This unit is compatible with the Apple Easy
Pairing function. When an iPod touch or iPhone is
connected to this unit, an authentication dialog
appears. Performing operation for authentication
on this unit or iOS smartphone registers the
smartphone as a Bluetooth device.
• If two Bluetooth units are connected, this unit will
not start the search. In this case disconnect one
of the Bluetooth units.
2
Select the Bluetooth unit to register
from the list.
NOTE
• If the unit cannot be searched in step 1, you can
search the unit again by touching [Search] in
above screen.
• A Bluetooth device cannot be searched while the
source is Pandora, iHeartRadio, or Bluetooth audio.
• Touch [Cancel] to cancel searching for the
Bluetooth unit.
3
Enter PIN code form the cell-phone.
Profile select screen appears.
Connecting the Bluetooth unit
1
Touch the device name you want to
connect.
Profile select screen appears.
NOTE
• If the icon is lighted, it means that the unit will
use that device.
2
Set each profile as follows.
TEL (HFP)
Means that the device is a cell-phone.
Audio (A2DP)
Means that the device is an audio player or
cell-phone with audio player.
NOTE
• If a device has been paired, the Bluetooth unit
cannot be connected from the paired device.
• Touching [Remove] of [Device Remove Confirm]
removes registration information. After you touch
the key, a confirmation message appears. Follow
the message and complete the operation.