Kenwood DNN991HD - Manual (Page 7)

English ñ 7
First Step
Power on the unit and perform some setup steps
before using.
1
Press the < 8HOME> button.
HOME 6
The unit is turned on.
✎ NOTE
• “Initial setup” also appears when the unit is reset.
2
Touch the corresponding key and set the
item.
Language Setup
Select the language used for the GUI and input
methods. Default is “English (United States)”.
1) Touch [Language Setup].
2) Select a language from the list.
WiFi Setup
Configure settings for connection to Wi-Fi.
1) Touch [WiFi Setup].
2) Slide Wi-Fi to ON.
3) Select the Wi-Fi access point to register from
the list.
4) Enter the Password.
5) Touch [Connect].
After setting, press the <
6 > button.
Mobile Network settings (DNN991HD)
Set the direct Internet connection with 4G/3G
Dongle.
1) Touch [Mobile Network settings].
2) Touch [Mobile Network configuration].
3) Enter the network information.
4) Touch [Save].
5) Touch [Mobile Network].
After setting, press the <
6 > button.
Date Setup
Set the date and time.
1) Touch [Date Setup].
2) Touch [Select time zone].
3) Select a time zone.
After setting, press the <
6 > button.
Account Setup
Set the information about the user of this unit.
1) Touch [Account Setup].
See Types of accounts, Create User Account and
Set Owner Account.