Aiwa XD-SPM823 - Manual (Page 18)

18
ENGLISH
Connections (continued)
S-VIDEO
OUT
DIGITAL
OUT
AUDIO
OUT1
DIGITAL OUT
VIDEO OUT
S-VIDEO
COMPONENT/
PROGRESSIVE SCAN
COAXIAL
OPTICAL
L
R
AUDIO
OUT2
L
R
Y
COMPONENT VIDEO OUT/
PROGRESSIVE SCAN
VIDEO
OUT
P R /C R
P B /C B
B Connecting to a TV and an amplifier with a digital input jack
Set the setup menu correctly after
connecting
Set the "TV Aspect" and "Digital Audio Output" in the setup
menu according to the TV and audio equipment connected
to the unit as follows:
(See "Changing Setup Values" on page 46 for details.)
TV Aspect
When the TV has a conventional 4:3 screen:
4:3 Letterbox or 4:3 Panscan
When the TV has a wide 16:9 screen:
16:9 Wide
Digital Audio Output
PCM
TV
yellow
to the video input jack (yellow)
Video cord (supplied)
Rear of the unit
yellow
to DIGITAL OUT
OPTICAL jack to DIGITAL OUT
COAXIAL jack
to an AC outlet
Optical cord (not supplied)
Coaxial cord (not supplied)
to the digital input jack
Front speaker (L) Amplifier with a digital input jack Front speaker (R)
to VIDEO OUT jack
(yellow)
CAUTION
DO NOT select "DOLBY DIGITAL/PCM" or "Stream/PCM"
for the "Digital Audio Output" in the setup menu when
connecting to an AV receiver not equipped with a Dolby
Digital decoder or DTS decoder (with an optical or coaxial
connecting cord).
Merely attempting to play a disc may cause a screeching
noise which could be harmful to your ears and damage
the speakers. In this case, be sure to select "PCM" for the
"Digital Audio Output".