Aiwa XD-SPM823 - Manual (Page 21)

ENGLISH
21
PREP
ARA
TIONS
En
S-VIDEO
OUT
DIGITAL
OUT
AUDIO
OUT1
DIGITAL OUT
VIDEO OUT
S-VIDEO
COMPONENT/
PROGRESSIVE SCAN
COAXIAL
OPTICAL
L
R
AUDIO
OUT2
L
R
Y
COMPONENT
VIDEO OUT/ PROGRESSIVE
SCAN
VIDEO
OUT
P R /C R
P B /C B
E Connecting to a TV and an AV receiver equipped with a DTS decoder
Set the setup menu correctly after
connecting
Set the "TV Aspect" and "Digital Audio Output" in the setup
menu according to the TV and audio equipment connected
to the unit as follows:
(See "Changing Setup Values" on page 46 for details.)
TV Aspect
When the TV has a conventional 4:3 screen:
4:3 Letterbox or 4:3 Panscan
When the TV has a wide 16:9 screen:
16:9 Wide
Digital Audio Output
Stream/PCM
TV
yellow
to the video input jack (yellow)
Video cord (supplied)
yellow
Rear of the unit
to VIDEO OUT jack (yellow)
to DIGITAL OUT
OPTICAL jack to DIGITAL OUT
COAXIAL jack
Coaxial cord (not supplied)
Optical cord (not supplied)
to the digital input jack
Receiver equipped
with a DTS decoder
Surround speaker (L)
Front speaker (L)
Center speaker Subwoofer Surround speaker (R)
Front speaker (R)
to an AC outlet
CAUTION
DO NOT select "Stream/PCM" for the "Digital Audio
Output" in the setup menu when connecting to an AV
receiver not equipped with a DTS decoder (with an optical
or coaxial connecting cord).
Merely attempting to play a disc may cause a screeching
noise which could be harmful to your ears and damage
the speakers. In this case, be sure to select "PCM" for the
"Digital Audio Output".
CONTINUE