Aiwa XD-SPM823 - Manual (Page 23)

ENGLISH
23
BASIC OPERA
TIONS
En
Getting ready to play
• Turn on the TV, and set its video source (Video 1, Video
2, Video 3, etc.) to the one connected to the unit.
• Turn on the audio equipment connected to the unit. Set
its input source to the one connected to the unit.
Loading discs
1
Press POWER.
The unit turns on and the 6 STANDBY/ON indicator turns
green. The “aiwa” screen appears on the TV screen.
2
Press z OPEN/CLOSE.
The disc compartment opens.
3
Load a disc in the tray at the center
position.
Place a disc in the tray guides (round slotted area) with the
label side facing up. When loading an 8-cm disc, place it in
the inner slotted area correctly.
4
To load another disc, press DISC SKIP.
The disc trays rotate and the next tray comes to the center
position.
Place a disc in the tray.
Repeat this step to load other discs (up to five discs).
Now you are ready to start playback.
NOTES
• Do not shock or vibrate the unit while playing.
• Do not push or shock the disc compartment while rotating
the disc trays.
• Do not put any objects other than discs on the disc trays.
About the symbol display
• The symbol will be displayed on the TV screen if
you press a button which cannot be used or enter an
invalid number.
• Some DVDs may have places where they do not allow
pressing certain buttons. The symbol will be
displayed on the TV screen if you press a button that
is not allowed in such a place.
Playback
1 2
4
1 2 3 4
CONTINUE
6 STANDBY/
ON indicator