AT&T TL760 - Manual (Page 10)

9
Getting started
Headset base installation
Option 3: Headset base with corded phone for
multiple line system or digital business system
installation (TL7610)
With this installation, you can make and receive calls using the
LIFTER MODE without a lifter.
1. Plug the small end of
the headset base power
adapter into the
POWER
jack (green dot) at the
back of the headset
base.
DSL filter (not
included) required
if you have DSL
high-speed Internet
service.
2. Plug the headset
base power adapter
into an electrical
outlet not controlled
by a wall switch.
5. Plug the other end
of the 4-conductor
telephone line cord into
the handset jack of the
corded phone.
3. Unplug the curly
handset cord from
the telephone. Plug
the end of the curly
handset cord into the
CURLY CORD
(light blue dot) jack on
the headset base.
4. Plug one end of
the 4-conductor
telephone line cord
into the
BASE JACK
(orange dot) jack on
the headset base.
7. Plug the other end
of the telephone
line cord into a
telephone jack.
6. Plug one end of the
telephone line cord into the
telephone jack of the corded
phone.
Curly handset
cord