AT&T TL760 - Manual (Page 8)

7
Getting started
Headset base installation
Option 1: Headset base with corded or cordless phone
installation (TL7610)
1. Plug the small end
of the headset
base power
adapter into the
POWER jack
(green dot) at
the back of the
headset base.
2. Plug one end of the
telephone line cord into
the
TEL WALL JACK (red
dot) at the back of the
headset base.
Telephone
line cord
3. Plug the other end of
the telephone line cord
connected into the line
splitter.
6. Plug the headset
base power adapter
into an electrical
outlet not controlled
by a wall switch.
Line splitter
Cordless or corded
phone
5. Connect another
telephone line cord
between the telephone
and the line splitter.
4. Plug the line splitter
into the telephone wall
jack (or DSL filter if
you subscribe to DSL
Internet service).
DSL filter (not
included) required
if you have DSL
high-speed
Internet service.