Setting the external device interrupt mode, Setting the navigation mode, Setting the navigation interruption – Alpine IVA-D100 User Manual

Page 39: Setting the aux mode, Adjusting the external input audio level, Switching the visual input signal

Advertising
background image

35

-EN

01GB05IVA100.fm

ALPINE IVA-D100 68-05946Z49-A (EN)

If an Alpine Ai-NET Auxiliary Input Adapter (KCA-801B) is
connected to the IVA-D100, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to a
portable MP3 player through your car audio system even with a CD
changer connected and playing. The CD changer will automatically
mute when switched to the AUX Input. For further details on how to use
the Alpine KCA-801B, see your authorized Alpine dealer.

Setting item: IN INT. MUTE
Setting content: OFF / ON

The auxiliary device being connected must have an Interrupt wire

with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.

When you connect an optional navigation equipment, set it to ON.

Setting item: NAV. IN
Setting contents: OFF / ON

With an Alpine navigation system connected to the IVA-D100, the voice
guidance of the navigation system will be mixed with the radio or CD
play.

Setting item: NAV. MIX
Setting content: OFF / ON

To adjust the navigation interruption volume level, the adjustment
for NAV. LEVEL can be performed in “Adjusting the Audio” on
page 25 after setting to ON.

The audio volume during the navigation guide can be set by

adjusting the audio volume while the navigation guide continues.
When the navigation guide finishes, the previous audio volume and
the previous screen are restored. For exception, if the navigation cuts
in when the audio volume is lower than the setting level, the audio
volume during the navigation guide is reset the current listening
volume. (When the navigation guide cuts in, the audio volume does
not increase.)

This setting is effective when NAV.IN of SYSTEM list screen is ON.

Setting item: AUX IN
Setting content: OFF / ON / CAMERA / VCR / GAME / TV /

EXT. DVD / EXTPLYR

If "CAMERA" is selected, CAMERA mode name is displayed on the

VISUAL selection screen. When the rear camera is selected even if
the shift lever is not set to reverse (R), the rear picture is output by
selecting CAMERA.

OFF is not displayed when the optional DVD player or DVD changer

is connected. During SYSTEM set up, although the AUX name can be
changed, it is not displayed on the source selection screen.

When OFF is selected, the settings related to AUX cannot be changed

from this unit.

The selected name is displayed on the VISUAL and REAR selection

screen.

Only when an Alpine TV tuner is connected, you can operate the

displayed function guide from this unit.

The selected source name is displayed instead of AUX source name.

Select SOURCE to switch to the guide function of each mode.
However “EXTPLYR” cannot be currently used, but will become
available when the system is expanded in the future.

When the AUX name other than “CAMERA” is selected on the

Source Select screen, “CAMERA” cannot be selected. If an other
source (Radio, etc.) is selected on the Source Select screen,
“CAMERA” can be selected.

After setting to ON in “Setting the AUX Mode,” this setting can be
carried out.

Setting item: AUX IN LEVEL
Setting content: LOW / HIGH

After setting to ON in "Setting the AUX Mode," this setting can be
carried out.

Setting item: AUX IN SIGNAL
Setting content: NTSC / PAL

The video input type can be changed.

Setting the External Device Interrupt Mode

OFF: The volume level can be adjusted in Interrupt mode.

ON:

Sound will not be output.

Setting the Navigation Mode

ON:

Navigation source is displayed.

OFF: Navigation source is not displayed. The settings related

to the navigation can not be changed from this unit.

Setting the Navigation Interruption

OFF: The navigation interruption mode is turned off.

ON:

The navigation interruption mode is on.

Setting the AUX Mode

OFF: AUX source is not displayed.

ON:

AUX source is displayed.

Adjusting the External Input Audio Level

LOW: Decreases the external input audio level

HIGH: Increases the external input audio level

Switching the Visual Input Signal

01GB00IVAD100.book Page 35 Tuesday, February 14, 2006 4:10 PM

Advertising