When using the remote control – Alpine IVA-D100 User Manual

Page 60

Advertising
background image

56

-EN

01GB06IVA100.fm

ALPINE IVA-D100 68-05946Z49-A (EN)

SETUP Button

Not used.

AUDIO Button

DVD/Video CD mode: Switches audio.

BAND Button

A.PROC Button

MUTE Button

Lowers the volume by 20 dB instantly. Press the button
again to cancel.
By pressing the button for more than 2 seconds, the monitor
opens or closes.

UP Button

, , ,

ENT. Button

Enters the selected item.

button

Numeric Keypad

Inputs numbers.

MONITOR Button

Not used.

ANGLE Button

SUBTITLE button

• The SETUP operation of the unit cannot be carried out from the

remote control.

• Some operations may not be possible depending on the disc.

When Using the Remote Control

• Point the remote control at the remote sensor within

about 2 meters.

• It may not be possible to operate the remote control if

the remote control sensor is exposed to direct
sunlight.

• The remote control is a small, lightweight precision

device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.
- Do not subject the remote control to excessive

shock.

- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.

Radio mode: Changes the band.

Changer mode:

Switches the disc mode.
(when an optional KCA-410C is connected)

DVD mode:

While playing a DVD, the display mode is
switched (only when car is stopped).

When an external audio processor is connected:

Press the button to display the audio
processor setting screen.

When an external audio processor is non-connected:

Press the button to display the audio mode
screen.

Radio mode: Selects, in ascending order, stations

programmed into the radio’s presets.

MP3/WMA mode:

Folder Select (UP) Button to selects the
folder.

Changer mode:

DISC Select (UP) Button selects a disc in
ascending order.

DVD Video/DVD Audio (VCAP) mode:

Selects an item displayed in the screen.

Radio mode: SEEK (UP) button

SAT mode:

Channel (UP) button

CD/Changer mode:

Press the button to advance to the beginning
of the next track. Press and hold to fast
forward.

MP3/WMA mode:

Press the button to advance to the beginning
of the next file. Press and hold to fast
forward.

DVD Video/DVD-VR/DVD Audio (VCAP)/Video CD:

• Move to the desired position on the disc.
• During playback, press and hold for more

than 1 second to forward the disc at
double speed. Hold for more than 5
seconds to forward the disc at 8 times the
normal speed. Hold for more than 10
seconds to forward the disc at 21 times
the normal speed.

DVD Video/DVD-VR/Video CD:

• When pressed and held in while in the

pause mode, the disc is played in slow
motion at 1/8th the normal speed. When
held in for 5 more seconds, the slow
motion speed switches to 1/2 the normal
speed.

• The picture is forwarded by one frame

each time the button is pressed in the
pause mode.

DVD Video/Audio (VCAP) mode:

Switches the angle of the picture.

DVD mode:

Switches the subtitle.

01GB00IVAD100.book Page 56 Tuesday, February 14, 2006 4:10 PM

Advertising