Kenwood KRF-V5450D - Manual (Page 19)

English
19
Co
n
n
e
c
tio
n
s
How to connect the wire to terminals How to connect the wire to terminals
(Screw type terminal) (KRF-V6400D only)
(Screw type terminal) (KRF-V6400D only)
1
Strip the vinyl coating of the wire by a length of
about 1 cm.
2
Loosen the knob.
3
Insert the wire.
Insert until the metallic conductor becomes invisible.
4
Tighten the knob.
How to connect the wire to terminals How to connect the wire to terminals
(Push type terminal)
(Push type terminal)
1
Strip the vinyl coating of the wire by a length of
about 1 cm.
2
Push the lever.
3
Insert the wire.
Insert until the metallic conductor becomes invisible.
4
Release the lever.
B60-5810-08_00_EN.indd 19 B60-5810-08_00_EN.indd 19 09.7.24 9:05:13 AM 09.7.24 9:05:13 AM