Kenwood KRF-V5450D - Manual (Page 33)

English
33
L
ist
en
in
g t
o
r
a
d
io broa
d
ca
sts
This unit can store up to 40 stations in the memory and recall
them by one-touch operation.
Radio stations can be classified into RDS (Radio Data System)
stations and other stations. To listen to or store RDS stations in
the preset memory see <Using RDS (Radio Data System)>
›.
Be sure to connect antennas to receive radio broadcasts. (See
<Connecting antennas>
).)
INPUT SELECTOR AUTO/MONO
AUTO/MONO BAND
TUNER
BAND
TUNING
/Y
MULTI CONTROL
MULTI CONTROL
O/
1
Set the input source to TUNER.
2
Use [BAND] to select the broadcast band.
Each press switches the band as follows:
1 FM
2 AM
3
Use [AUTO/MONO] to select the tuning method.
Each press switches the tuning method as follows:
Setting Operation Indicator
Auto tuning The next station is tuned automatically. "AUTO" lit
Manual tuning Select a station manually. "AUTO" not lit
Normally, set to "AUTO" (auto tuning). If the radio waves are
weak and there is a lot of interference, switch to manual
tuning. (With manual tuning, stereo broadcasts will be
received in monaural.)
4
Use [TUNING
1/¡] to select the station.
"TUNED" lights when a broadcast is being received.
"ST" lights when a broadcast is being received in stereo.
• [MULTI CONTROL ∞/5] can also be use to select a
station.
Tuning into a radio station
B60-5810-08_00_EN.indd 33 B60-5810-08_00_EN.indd 33 09.7.24 9:05:24 AM 09.7.24 9:05:24 AM