Kenwood KRF-V5450D - Manual (Page 23)

English
23
Set
u
p
The detailed settings allow you to enjoy full performance of the
receiver according to the environment of your listening room.
For creating the best listening environment, Kenwood
recommends to perform the setup at the listening position.
SETUP
MULTI CONTROL
O/
Speaker setup flow Speaker setup flow
Speaker settings consist of 6 elements.
1
Enter the Detailed Setup mode.
[SETUP]
Use [MULTI CONTROL ∞/5] to select an item to set.
[SETUP]
Elements Display Setting
Speaker Configuration "SP SETUP"
Selects whether each speaker channel is
used or, if used, its size.
Speaker Level "TESTTONE"
Selects the output level from each
speaker.
Speaker Distance "DISTANCE"
Selects the distance between each
speaker and the listening position.
Crossover "CROSSOVER"
Sets the lower limit of the bass
frequencies reproduced from the speakers
set to "NML" in the "SP SETUP". The
frequencies below the frequency set here
are distributed to other speakers (those
set to "LRG" and the subwoofer).
Low Frequency Effects
Level
"LFE LVL"
Selects the level of bass audio
enhancement.
Low Frequency Effect channel delivers
separate non-directional bass signals to
the subwoofer for more dynamic deep
bass sound effects.
Lip Sync
(KRF-V6400D only)
"LIP SYNC"
Adjusts the deviation in time between
the video and audio.
"EXIT" Exits the Detailed Setup mode.
2
Set each item.
See the followings for each setup item.
Speaker configuration Speaker configuration
Select the use of each speaker and its size.
1
Enter the Detailed Setup mode.
[SETUP]
Use [MULTI CONTROL ∞/5] to select "SP SETUP".
[SETUP]
2
Select the use and size of each speaker.
Use [MULTI CONTROL ∞/5] to select the speaker and its
use or size.
[SETUP]
Repeat the above operations until all of the speakers
have been set up.
Speaker Display Setting
Subwoofer
"SUBW ON" Subwoofer is connected.
"SUBW OFF" Subwoofer is not connected.
Front speaker
"FRNT LRG" Large size front speaker
"FRNT NML" Average size front speaker
Center speaker
"CNTR LRG" Large size center speaker
"CNTR NML" Average size center speaker
"CNTR OFF" Center speaker is not connected.
Surround speaker
"SURR LRG" Large size surround speaker
"SURR NML" Average size surround speaker
"SURR OFF" Surround speakers are not connected.
Surround Back speaker
(KRF-V6400D only)
"BS LRG"
Large size surround back speaker is
connected. (6.1ch)
"BS NML"
Average size surround back speaker is
connected. (6.1ch)
"BS OFF" Surround back speaker is not connected.
Subwoofer Re-mix* 1
"RMX ON" Subwoofer re-mix is on.
"RMX OFF" Subwoofer re-mix is off.
* 1 Mixes the bass tone of other channels to the subwoofer
channel.
3
Go to the next setting.
Speaker setup (Detailed Setup)
Continued
B60-5810-08_00_EN.indd 23 B60-5810-08_00_EN.indd 23 09.7.24 9:05:16 AM 09.7.24 9:05:16 AM