Kenwood M-505USB-S - Manual (Page 13)

EN
13
Programming fi les (For audio fi le only)
Programming fi les of an MP3-CD/WMA-CD/USB
device is possible when playback is stopped. Up to 60
fi les can be stored in the memory in any order.
1
In stop mode, press P.MODE button to enter
program setting.
The icon “PGM” and “– – – P–01” appear on the
display. “– – –” indicates fi le number of the disc/USB
device and “P–01” indicates program number.
The icon “PGM” starts fl ashing.
2 Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button to select the desired fi le.
The program number starts fl ashing.
3 Press P.MODE button to store the selected fi le.
The fi le number returns to “– – –” and the next
program number appear on the display.
4
Repeat steps 2 to 3 to select and store other
desired fi les in this way.
The icon “PGM” appears on the display.
5 Press FWD PLAY 6 (6) button to play the
programmed fi les.
⁄
• The digit buttons, 0–9 on the remote control unit can also be
used to select fi les.
• “FULL” starts fl ashing if you attempt to program more than 60
fi les.
• Audio fi les can only be programmed within the same source.
• To review the program sequence, press P.MODE button in
stop mode.
• If you press REPEAT button during programmed playback,
the current fi le or all programmed fi les is/are played
repeatedly.
The icon “REPEAT” or “REPEAT ALL” and the icon “PGM” appear
on the display.
To clear the program
Press STOP 7 (7 stop) button once in stop mode,
and twice during program playback.
The icon “PROGRAM” disappears from the display.
⁄
• “P” represents PROGRAM.
• The program is automatically cleared as soon as the CD tray is
opened.
• The function of program setting cannot be used in PLAY/
PAUSE mode.
Random play
You can play all the tracks/fi les in random order.
1 During playing, pause or stop mode, press
RANDOM button to enable random play mode.
The icon “RDM” appears on the display.
2 To exit random mode, press RANDOM button
again.
The icon “RDM” disappears from the display.
⁄
• If the program function or the repeat function is on, random
play cannot be used.
Repeat play
You can play the current track/fi le/album or the
whole disc/USB device repeatedly.
To repeat a single track/fi le
Press REPEAT button once in play or pause mode.
The icon “REPEAT” appears on the display.
⁄
• To cancel repeat play, press REPEAT button twice for a CD
and 3 times for audio fi les.
To repeat all the tracks/fi les
Press REPEAT button twice for a CD and 3 times for
audio fi les in play or pause mode.
The icon “REPEAT ALL” appears on the display.
⁄
• To cancel repeat play, press REPEAT button once.
• All tracks/fi les are repeated continuously.
To repeat one album (For audio fi le only)
Press REPEAT button twice in play or pause mode.
The icon “REPEAT ALB.” appears on the display.
⁄
• To cancel repeat play, press REPEAT button twice.
• This function cannot be used in program mode.
M-505USB_EN_r12.indd 13 M-505USB_EN_r12.indd 13 07.8.29 4:44:44 PM 07.8.29 4:44:44 PM