Kenwood DDX5025BT - Manual (Page 20)

20
TUNER
Listening to the radio
❏ Indications and buttons on the source
control screen
1 2 3
4 6 5 7 8 9
p
q
Tuner reception information
1 Band
2 Preset no.
3 The station frequency currently tuned in
4 ST/MONO indicator
• The ST indicator lights up when receiving an
FM stereo broadcast with sufficient signal
strength.
5 AF indicator
6 Seek mode
7 LO.S indicator (See the far right column.)
8 RDS indicator: Lights up when receiving a Radio
Data System station.
9 EON indicator: Lights up when a Radio Data
System station is sending EON signals.
p Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
q Standby reception indicators
Operation buttons
[P1] – [P6] • Selects a stored station. (Press)
• Stores the current station. (Hold)
[MODE] Changes the settings for tuner
reception on the <Tuner Mode>
screen. (Pages 20 and 22)
[TI] Activates/deactivates TI standby
reception mode. (Page 21)
[AME] Presets stations automatically.
(Page 21)
[MONO]* Activates/deactivates monaural
mode for better FM reception.
(Stereo effect will be lost.)
• The MONO indicator lights up
while monaural mode is activated.
[ ] Changes the display information.
(See the right column.)
[ ]
Displays the easy control screen.
(Page 8)
[PTY]* Enters PTY search mode. (Page 21)
[AM] Selects the AM band.
[FM] Selects the FM band.
[SEEK] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in the stations in
memory one after another.
• MANU: Manual Search
[S] [T] Searches for a station.
• The search method differs
according to the selected seek
mode. (See above.)
[MENU] Displays the <TOP MENU> screen.
* Appears only when FM is selected as the source.
❏ Changing the display information
The preset list and the station name for FM Radio
Data System (when PS signal is coming in) are
displayed.
• Pressing [
] again displays the text information
for the station currently being received.
❏ Tuning in FM stations only with strong
signals — Local Seek
1
2
[ON] Select this to tune in only to stations
with sufficient signal strength. The LO.S
indicator lights up.
[OFF] Deactivate the function.
DDX_Mid_E.indb 20 2014/01/23 19:49