Kenwood DDX5025BT - Manual (Page 39)

ENGLISH 39
SETTINGS
Sound ad justment
❏ Using the sound equalization
• The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
– DVD/DVD-VR/VCD
– CD
– DivX/MPEG1/MPEG2/H.264/WMV/MP3/WMA/
WAV/AAC/FLAC
• You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1 Display the <Equalizer> screen.
On the <TOP MENU> screen:
2 Select a sound mode .
• You can change the page to display more
items by pressing [J]/[K].
• You can also display the <Equalizer> screen by
pressing AUD (for DDX7025BT/DDX7055BT) or by
pressing and holding the Volume/ATT/ AUD knob
(for DDX5025DAB/DDX5025BT/DDX5055BT) on
the monitor panel.
Storing your own adjustment—Adjusting the
sound precisely
1 Select a sound mode. (See the left column.)
2 Select a band and adjust the level of the
selected band.
• The number of bands depends on the model.
• You can adjust the level by dragging the
control or using [J]/[K].
• Repeat this step to adjust the level of other
bands.
The adjustments are stored and <User> is
activated.
3 Activate ([ON]) or deactivate ([OFF]) the
bass (<Bass EXT>) (1), and then adjust
the subwoofer level (2).
❏ Setting the car type and speakers
1 Display the <Car Setting> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
2 Select a car type (1), and then select the
location of the speakers (2).
DDX_Mid_E.indb 39 2014/01/23 19:49