Kenwood KDC-BT52U - Manual (Page 17)

32 | KDC-BT52U English | 33
Contents
Registering Bluetooth device
Bluetooth device registration test
You can check whether a Bluetooth device can be
registered by operating this unit.
1 Enter the Bluetooth mode
Press and hold the [ ] button.
Search for a Bluetooth device starts with “Searching”
displayed.
2 Select the Bluetooth device to test
Turn the Control knob to select the Bluetooth
device name.
3 Enter the Connectivity test mode
Press and hold the Control knob.
“BT Test Mode” is displayed.
4 Input the PIN code
Input the PIN code of Bluetooth device if it has
been changed from default.
Operation type Operation
Selection of numbers Turn the Control knob.
Movement to the next digit Push the Control knob rightward.
Delete the last digit
Push the Control knob leftward.
Transmit the PIN code. Press the Control knob.
When pairing is completed successfully, connection
test starts automatically.
When the connection test is completed, test results
are displayed on a function basis (“OK”: Enabled;
“NG”: Disabled).
Display Description
“Pairing” Registration in this unit
“HF Connect” Hands-free phoning
“AUD Connect” Audio playback
“PB Download” Phone Book downloading
5 Exit the Connectivity test mode
Press the Control knob.