Kenwood KDC-BT52U - Manual (Page 9)

16 | KDC-BT52U English | 17
Contents
5 Select a setting and determine it
Turn the Control knob to select a desired value,
and then press the Control knob.
The previous item is displayed.
6 Exit the Function setting mode
Press and hold the [ ] button.
Tuner setting
You can set up the tuner.
1 Select the Tuner source
Press the [SRC] button.
Select the “TUNER” display.
2 Enter the Function setting mode
Press and hold the Control knob.
3 Select the Settings item
Turn the Control knob to select “Settings”, and
then press the Control knob.
4 Select a desired Tuner setting item
Turn the Control knob to select Tuner setting
item, and then press the Control knob.
Display Description
“Settings”
“Local Seek” Only stations whose reception is good are
searched in auto seek tuning.
“ON” / “OFF”
“Seek Mode” Sets the tuning mode of the Radio.
Auto1: Automatic search for a station.
Auto2: Search in order of the stations in the
preset memory.
Manual: Normal manual tuning.
“MONO” You can reduce the noise when stereo
broadcasts are received as monaural.
“ON” / “OFF”
“News Interrupt” Automatically receives news bulletin when
it starts. Set the time during which interrupt
is to be disabled after start of another news
bulletin.
Changing “00MIN” to “90MIN” turns this
function ON.
If news bulletin starts when this function is
ON, “NEWS” is displayed and news is received.
If “20MIN” is has been set, reception of another
news bulletin will not start for 20 minutes.
The news bulletin volume is the same level
that was set for Traffic Information.
“OFF” / “00MIN” – “90MIN”
“AF” When the reception is poor, automatically
alternate to another frequency broadcasting
the same program in the same Radio data
system network with better reception.
“ON” / “OFF”
“Regional” Sets whether to switch to the station only in
the specific region using the “AF” control.
“ON” / “OFF”
“Auto TP Seek” When traffic information station reception is
poor, automatically searches for a station that
can be received better.
“ON” / “OFF”
( : Factory setting)
Tuner Operation
Auto memory
You can register 18 (FM)/ 6 (AM) stations with good
reception automatically.
1 Select the Tuner source
Press the [SRC] button.
Select the “TUNER” display.
2 Enter the Function setting mode
Press and hold the Control knob.
3 Select the Auto memory function item
Select the following items using the Control
knob.
“Settings”
> “Auto Memory”
4 Start storing stations in the Auto memory
mode
Turn the Control knob to select “YES”, and then
press the Control knob.
When 18 (FM)/ 6 (AM) stations that can be received
are stored in the memory, the process in this mode
is completed.
For the basic operations to listen to the radio, refer
to the Quick Start Guide.
Refer