Before use – Kenwood KDC-BT52U User Manual

Page 3

Advertising
background image

4

|

KDC-BT52U

English

|

5

Contents

Before use

Before using the this unit for the first time

This unit is factory-set to operate in the

Demonstration mode initially.

When using this unit for the first time, cancel

the Demonstration mode. Refer to

<Exiting the

Demonstration mode> (page 4)

in Quick Start

Guide.

2

WARNING

To prevent injuries or a fire, take the

following precautions:

• Stop the car before operating the unit.
• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools) inside

the unit.

¤

CAUTION

• Adjust the volume so that you can hear the sound

outside the car. Driving with the volume too high

may cause an accident.

• Wipe off the dirt on the panel with a dry silicon or

soft cloth.

Failure to observe this precaution may result in

damage to the monitor or unit.

Cleaning the connector

The unit may not function properly if the connectors

between the unit and faceplate are dirty. Detach the

faceplate and clean the connector with a cotton swab

gently, being careful not to damage the connector.

Connector

Condensation

When the car is air-conditioned, moisture may collect

on the laser lens. This may cause disc read errors. In

this case, remove the disc and wait for the moisture

to evaporate.

Notes

• If you experience problems during installation,

consult your Kenwood dealer.

• When you purchase optional accessories, check with

your Kenwood dealer to make sure that they can

work with your model and in your area.

• Characters that conform to ISO 8859-1 can be

displayed.

• Characters that conform to ISO 8859-5 or ISO 8859-

1 can be displayed. Refer to

“Russian”

of

<Initial

settings> (page 27)

.

• The illustrations of the display and panel appearing

in this manual are examples used to explain more

clearly how the controls are used. Therefore, what

appears on the display in the illustrations may differ

from what appears on the display on the actual

equipment, and some of the images on the display

may be inapplicable.

About the discs used with this unit

• This unit can only play the CDs with

.

• The following discs cannot be used:

- A discs that is not round

- A discs with coloring on the recording surface or a

disc that is dirty

- A recordable/rewritable disc that has not been

finalized (For the finalization process, refer to

the instruction manual that came with your disc

writing software or your disc recorder.)

- An 8 cm (3 inch) disc (An attempt to insert using

an adapter can cause malfunction.)

Handling discs

• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with

tape stuck on it.

• Do not use any accessories for the disc.
• Do not use any solvents to clean discs. Use a dry

silicon or soft cloth.

• Clean the disc by moving the cloth outward from

the center of the disc.

• When removing a disc from this unit, pull it out

horizontally.

• If the center hole or outside rim of a disc has burrs,

remove them before inserting a disc.

How to reset your unit

If the unit fails to operate properly, press the Reset

button. The unit returns to the factory settings when

the Reset button is pressed.

Reset button

Advertising