Bluetooth setup, Bluetooth setting, Bluetooth – Kenwood KDC-BT60U User Manual
Page 46
46
|
KDC-BT60U/ KDC-6047U
Bluetooth Setup
Bluetooth Setting
You can select following Bluetooth Setting items.
1
Enter Bluetooth mode
KDC-BT60U
Press the [
] button.
KDC-6047U
Press the [TI] button for at least 1 second.
✍
You can also select from “Settings” in Menu List
mode.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”.
3
Select the Menu item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display
Overview
“BT Settings”
“Phone Selection” Select a cell-phone or Bluetooth audio player
connection.
Refer to
<Selecting the Bluetooth device You
.
“Audio Selection”
“SMS Download”
Download a short message.
Refer to
<Downloading the SMS> (page 52)
.
“SMS Inbox”
Display the received short message.
Refer to
.
“Voice Tag”
Registers voice for voice recognition and voice
to select the Phone number category in Phone
book.
- Adding a Voice Dialing Command (page 50)
- Setting a Voice Command for Category (page
“Detailed Setup”
Move to detailed item.
“Device Regist.” Register a Bluetooth device (pairing).
Refer to
<Registering Bluetooth device>
.
“SPCL DVC
Select”
“Device Delete” Cancel registration of the Bluetooth device.
Refer to
<Deleting a Registered Bluetooth
.
“PIN Code Edit” Specify the PIN code required when registering
this unit using the Bluetooth device.
Refer to
<Registering PIN Code> (page 48)
“Auto Answer” Answer a call automatically after lapse of the
preset time interval for automatic answer.
“OFF”/ “0s” – “8s” – “99s”
“Bluetooth HF/
Audio”
You can specify output speakers for hands-free
voice communication and Bluetooth audio
sound.
“FRONT”: Outputs voice from the front
speakers.
“ALL”: Outputs voice from the front and rear
speakers.
“Call Beep”
You can output a beep from the speaker when
a call comes in.
“ON”: Beep is heard.
“OFF”: Beep is canceled.
“BT F/W Update” Display the version of the firmware of this unit.
“Mic Gain”*
1
Adjust the sensitivity of the microphone for a
telephone call. Adjust the voice of caller. Setting
to “+” increases the voice volume.
“–3” – “0” – “+3”
“NR Level”*
1
Reduce the noises generated by surrounding
environment without changing the microphone
volume. Adjust the voice of caller when it is
not clear. Setting to “+” increases the noise
reduction.
“–3” – “0” – “+3”
“Echo Cancel
LV“*
1
Adjust the level of echo cancellation. Setting to
“+” increases the echo cancel reduction.
“–2” – “0” – “+2”
( : Factory setting)
*
1
Function of KDC-BT60U
4
Make a setting
• When the “
PUSH
” icon is displayed (at the
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
• When the “
PUSH
” icon is not displayed
Press the [
4] or [¢] button to select a
setting value.
5
Exit BT Settings mode
KDC-BT60U
Press the [
] button.
KDC-6047U
Press the [TI] button for at least 1 second.
Remarks
• “Auto Answer” (Setting the Time Interval for Automatic
Answer)
This function automatically answers (responds to) a call
after lapse of the preset time interval for automatic answer.
“OFF” : Does not answer the phone call automatically.
“0” : Automatically answers the phone call at once.
“1s” – “99s” : Automatically answers the phone call after
lapse of 1 – 99 seconds.
⁄
Function of KDC-BT60U
KDC-6047U with KCA-BT200 (Optional Accessory)
4
MENU VOL
¢
38
/ TI