Kenwood KDC-BT60U - Manual (Page 48)

48
| KDC-BT60U/ KDC-6047U
Bluetooth Setup
Function of KDC-BT60U
KDC-6047U with KCA-BT200 (Optional Accessory)
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Enter Bluetooth mode
KDC-BT60U
Press the [ ] button.
KDC-6047U
Press the [TI] button for at least 1 second.
✍ You can also select from “Settings” in Menu List
mode.
2
Enter PIN code edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”
> “Detailed Setup” > “PIN
Code Edit”.
The current setting of PIN code is displayed.
3
Input the PIN code
Operation type Operation
Select the numbers. Turn the [VOL] knob.
Move to the next digit. Press the [ ¢] button.
Delete the last digit. Press the [ 4] button.
4
Register a PIN code
Press the [VOL] knob for at least 1 second.
If “Completed” is displayed, registration is
completed.
5
Exit BT Settings mode
KDC-BT60U
Press the [ ] button.
KDC-6047U
Press the [TI] button for at least 1 second.
⁄
• By default, “0000” is specified.
• A PIN code can be specified with up to eight digits.
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Enter Bluetooth mode
KDC-BT60U
Press the [ ] button.
KDC-6047U
Press the [TI] button for at least 1 second.
✍ You can also select from “Settings” in Menu List
mode.
2
Select Bluetooth device selection mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Cell-phone
Select “BT Settings”
> “Phone Selection”.
Audio player (KDC-6047U only)
Select “BT Settings”
> “Audio Selection”.
3
Enter Bluetooth device selection mode
Press the [VOL] knob for at least 1 second.
“(name)” is displayed.
4
Select the Bluetooth device
Turn the [VOL] knob.
5
Set up the Bluetooth device
Press the [
4] or [¢] button.
“✱(name)” or “-(name)” is displayed.
“✱”: The selected Bluetooth device is busy.
“-”: The selected Bluetooth device is on standby.
“ “ (blank): The Bluetooth device is deselected.
6
Exit BT Settings mode
KDC-BT60U
Press the [ ] button.
KDC-6047U
Press the [TI] button for at least 1 second.
⁄
• If a Bluetooth device is already selected, deselect it, and
then select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.