Kenwood KDC-BT60U - Manual (Page 43)

English |
43
Audio Preset Recall
Recalling the sound setup registered by <Audio
Preset Memory> (page 42) .
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio preset recall mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup”
> “Preset” > “Recall”.
3
Select the number to recall in the memory
Turn the [VOL] knob and press it when the
desired item is displayed.
Select preset number.
4
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
“Recall Completed” is displayed.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• The “User” of <Preset Equalizer curve Select> (page 37) is
changed to the value which was recalled.
• The Equalizer curve is changed to the value which was
recalled by the selected source.