Kenwood TK-2185E - Manual (Page 41)


c
lock
If activated by your dealer, your transceiver can track the time
and date with its built-in clock. To view the clock any time,
press the key programmed as Clock.
If programmed by your dealer, the time will display momentarily
when the transceiver power is turned ON.
Note: Removing the battery pack or leaving the battery pack
uncharged for extended periods will cause the clock time to clear.
■
Clock Setup
To set the year, month, day, and time:
1 With the transceiver power OFF, press and hold the
C> key while turning the transceiver power ON.
• The current year setting appears.
2 Rotate the selector to select the year, then press the
S key to cycle to the month setting.
• Repeat this step, to cycle through the day, hour, and
minute settings.
3 Press the S key again, to return to the year setting.
• A triple beep will sound, indicating that your selections
have been set into the transceiver memory.
4 Turn the transceiver power OFF and then back ON to
return to normal operation.