AT&T DECT EL51359 - Manual (Page 22)

Telephone operation
17
Options while on calls
Volume control
While on a call, press TVOLUME/
CID
to decrease or press SVOLUME/
DIR
to
increase the listening volume.
Call waiting
If you subscribe to call waiting service with your local telephone service provider,
you hear a beep if someone calls while you are already on a call. Press
PHONE
/FLASH to put your current call on hold and take the new call. Press
PHONE
/FLASH at any time to switch back and forth between calls.
Mute
Use the mute function to turn off the microphone. You can hear the caller, but
the caller does not hear you.
To mute a call:
• Press
DELETE
/MUTE. When mute is on, the handset screen
shows MUTED for a few seconds and the MUTE icon
appears until you turn off mute.
To un-mute a call:
• Press
DELETE
/MUTE again. When mute is off,
MICROPHONE ON appears temporarily on the handset
screen.
NOTES:
1. Handset and speakerphone volume settings are independent.
2. When the volume reaches the minimum or maximum setting,
you hear two beeps.
QIPOF!!!1;11;41
NVUFE
MUTE