AT&T DECT EL51359 - Manual (Page 38)

Caller ID
33
Caller ID history
Make a call log entry ready to dial
Although the call log entries received typically have
10 digits (the area code plus the seven-digit number),
in some areas, you might need to dial only the seven
digits, or 1 plus the seven digits, or 1 plus the area
code plus the seven digits. You can change the
number of digits that you dial from and store in the
call log.
While reviewing the call log, press # repeatedly to
show different dialing options for local and long
distance numbers before dialing or saving the
telephone number in the directory.
Press 1 repeatedly if you need to add or remove 1 in front of the telephone
number before dialing or saving it in the directory.
When the number is shown in the correct format for dialing, press
PHONE/
FLASH
or SPEAKER to call the number.
Dial a call log entry
1. When in the call log, press TCID or DIRS to browse.
2. Press PHONE/
FLASH
or SPEAKER to dial the entry.
Delete entries
• Press DELETE/
MUTE
to delete the shown entry from the caller ID history.
• Follow the steps below to delete all caller ID entries.
1. Press MENU/
SELECT
in idle mode to enter the main menu.
2. Use TCID or SDIR to scroll to >CALL LOG, then press
MENU
/SELECT.
3. Press TCID to scroll to >DEL ALL CALLS, then press
MENU
/SELECT.
4. When the screen shows DELETE ALL CALLS? press
MENU
/SELECT to
clear the caller ID history of all entries, or press OFF/CLEAR to exit
and leave all entries in the caller ID history intact.
NOTE: If you do not need to dial the area code for local calls, make sure to
program your home area code. See page 14 for details.
994.3556
2.994.3556
999.994.3556
2.999.994.3556
994.3556
2.994.3556
999.994.3556
2.999.994.3556
Press #
Press
1