U.S. Products CMX-20 ROTARY EXTRACTOR - Manual (Page 15)

3-1: Assembly Instructions
CMX-20
3 - Assembly Instructions
To prepare your CMX-20 for use, follow these instructions:
Remove the machine from the packaging. Inspect the machine carefully for any 1.
damage that may have occurred during shipping.
Remove the solid shipping plug from the top of the gear box (see
2. figure 3-1).
Check the gear box lubricant level (see page 3. 6-4 of this Owner’s Manual).
Insert the vented plug (provided) into the gear box in place of the solid shipping plug. 4.
The solid shipping plug may be discarded.
Remove the protective wrapping material from the wheels.
5.
Attach the cleaning head, or star, assembly to the base of the CMX-20 (see 6.
figure 3-1).
lean the machine back and rest it on the handle. a.
Thread the star assembly (cleaning head) onto the exposed shaft in a b.
counterclockwise direction.
be sure to remove the solid shipping plug from the top of the gear box and replace
it with the vented plug (P/N 000-106-014), provided, before operating the machine
(see figure 3-1). failure to follow these directions may result in damage to the
gear box and seal.
your CMX-20 is now ready to operate.
figure 3-1. fully Assembled CMX-20
Head, or Star, Assembly
Shipping Plug
Base