U.S. Products CMX-20 ROTARY EXTRACTOR - Manual (Page 19)

4-3: Operating Instructions
CMX-20
To fully engage the motor as you are cleaning, you also need to hold down the 2.
momentary switch, or button, at the same time you as you squeeze the motor trigger
(see figure 4-2). The momentary switch is an integrated safety feature on the
CMX-20 which cuts power to the machine if the operator’s hands leave the machine
for any reason.
On the left-hand side, squeeze the solution trigger to control the high pressure 3.
solution spray (see figure 4-2).
Notice that the air flows constantly while the CMX-20 is in operation.
do not operate your CMX-20 on dry carpets The friction generated by the revolving
cleaning heads may damage fibers in the carpet.
Maneuvering Your CMX-20
Your CMX-20 maneuvers like a rotary floor machine.
To move the CMX-20 to the right, lift the handle slightly (see 1. figure 4-3). The more
you lift or lower the handle, the faster the CMX-20 will move.
figure 4-3. Lift or Lower Handle to Maneuver; Illustration to the Right
Shows Incorrect Maneuver