Document Outline

• ENGLISH
  • 1 About this manual
    • 1.1 Typographical conventions
  • 2 Notes on copyright and information on trademarks
  • 3 Safety rules
  • 4 Identification
    • 4.1 Product description and type designation
      • 4.1.1 NXPTZ
      • 4.1.2 NXPTZT
    • 4.2 Product markings
      • 4.2.1 Checking the markings
  • 5 Versions
    • 5.3 IP video encoder
  • 6 Preparing the product for use
    • 6.1 Safety precautions before use
    • 6.2 Unpacking and contents
      • 6.2.1 Unpacking
      • 6.2.2 Contents
    • 6.3 Safely disposing of packaging material
    • 6.4 Preparatory work before installation
      • 6.4.1 Fixing to parapet or ceiling mount
      • 6.4.2 Fixing with bracket
      • 6.4.3 Fixing the unit to the pole mount adapter or corner mount adapter
        • 6.4.3.1 Fixing with pole mount
        • 6.4.3.2 Fixing with corner adapter
      • 6.4.4 Fixing the sunshield
  • 7 Assembling and installing
    • 7.1 Installation
      • 7.1.1 Range of use
      • 7.1.2 Methods of installation
      • 7.1.3 Connection of the power supply line
      • 7.1.4 Connections of one or more video cables
      • 7.1.5 Connection of the Ethernet cable
      • 7.1.6 Telemetry line connections
      • 7.1.7 Alarm and relay connections
        • 7.1.7.1 Connecting an alarm with clean contact (dry contact)
        • 7.1.7.2 Relay connection
    • 7.2 Hardware configuration
      • 7.2.1 Opening the configuration door
      • 7.2.2 Configuration of the dip-switches
      • 7.2.3 Setting the configuration check mode
      • 7.2.4 Baud rate configuration
      • 7.2.5 Setting of the serial communication lines
        • 7.2.5.1 Two-way RS-485 TX/RX line
        • 7.2.5.2 Line RS-485-1 reception, line RS-485-2 repetition
        • 7.2.5.3 Two-way RS-422 line
        • 7.2.5.4 One-way RS-485 line
      • 7.2.6 Serial line terminations
      • 7.2.7 Protocol configuration
      • 7.2.8 Address configuration
      • 7.2.9 Configuration of the version with IP board
      • 7.2.10 Closing the configuration door
  • 8 Switching on
    • 8.1 Before powering the device
    • 8.2 Checks list
  • 9 Configuration
    • 9.1 OSM interface (On Screen Menu)
      • 9.1.1 Using the OSM
        • 9.1.1.1 How to use the joystick
        • 9.1.1.2 How to move around the menus
        • 9.1.1.3 How to change the settings
        • 9.1.1.4 How to change the numeric fields
        • 9.1.1.5 How to change text
      • 9.1.2 Configuration via OSM
      • 9.1.3 Main menu
      • 9.1.4 Language
      • 9.1.5 Camera menu
        • 9.1.5.1 Zone Titling Menu
        • 9.1.5.2 Zone Titling Menu (Edit Area)
        • 9.1.5.3 Masking Menu
        • 9.1.5.4 Masking Menu (Edit Masks)
        • 9.1.5.5 How to create a new mask
        • 9.1.5.6 How to modify a mask
        • 9.1.5.7 Advanced Setting Menu
        • 9.1.5.8 Advanced Setting Menu (Zoom)
        • 9.1.5.9 Advanced Setting Menu (Focus)
        • 9.1.5.10 Advanced Setting Menu (Exposure)
        • 9.1.5.11 Advanced Setting Menu (Infrared)
        • 9.1.5.12 Advanced Setting Menu (White Balance)
        • 9.1.5.13 Advanced Setting Menu (Other)
      • 9.1.6 Movement Menu
        • 9.1.6.1 Manual Control Menu
        • 9.1.6.2 Manual Control Menu (Limits)
        • 9.1.6.3 Preset Menu
        • 9.1.6.4 Preset Menu (Edit Preset)
        • 9.1.6.5 Preset Menu (Utilities Configuration)
        • 9.1.6.6 Patrol Menu
        • 9.1.6.7 Autopan Menu
        • 9.1.6.8 Motion Recall Menu
        • 9.1.6.9 Advanced Menu
      • 9.1.7 Display Menu
      • 9.1.8 Options Menu
        • 9.1.8.1 Alarms Menu
      • 9.1.9 Washer Menu
      • 9.1.10 Default Menu
      • 9.1.11 Info Menu
      • 9.1.12 Thermal Camera Menu
        • 9.1.12.1 Flat Field Correction Menu
        • 9.1.12.2 Flat Field Correction Menu (Gain Switch Values)
        • 9.1.12.3 Video Setup Menu
        • 9.1.12.4 Gain Control Menu
        • 9.1.12.5 ROI Setup Menu
        • 9.1.12.6 Thermal Analysis Menu
        • 9.1.12.7 Thermal Analysis Menu (Spot Meter)
        • 9.1.12.8 Thermal Analysis Menu (Isotherm)
        • 9.1.12.9 Status Menu
    • 9.2 Sofware interface
      • 9.2.1 Minimum system requirements
      • 9.2.2 Configuration procedure through software
      • 9.2.3 Installing the software
    • 9.3 Web interface
      • 9.3.1 Home
      • 9.3.2 User Controls
      • 9.3.3 Device Parameters
      • 9.3.4 Device Statistics
      • 9.3.5 Network Configuration
      • 9.3.6 User Configuration
      • 9.3.7 Movement Parameters
        • 9.3.7.1 Autopan
        • 9.3.7.2 Patrol
        • 9.3.7.3 Motions Recall
      • 9.3.8 Preset Parameters
      • 9.3.9 Preset Parameters (Advanced)
      • 9.3.10 Digital I/O
      • 9.3.11 Washer
      • 9.3.12 Camera Parameters
      • 9.3.13 Tools
      • 9.3.14 Factory Default
  • 10 Accessories
    • 10.1 Washer
  • 11 Instructions for normal operation
    • 11.1 Visualizing the state of the pan & tilt
    • 11.2 Saving the current position (Preset)
      • 11.2.1 Quick save
      • 11.2.2 Saving from the Menu
    • 11.3 Recalling a position (Scan)
    • 11.4 Enabling the patrol (Patrol)
    • 11.5 Enabling Autopan Function
    • 11.6 Recalling a pattern (Tour)
    • 11.7 Recalling the Home position
    • 11.8 Enabling the wiper (Wiper)
    • 11.9 Enabling the washer (Washer)
    • 11.10 Reboot the device
    • 11.11 Manual correction of a preset focusing
    • 11.12 Web interface
    • 11.13 Special controls
  • 12 Maintaining and cleaning
    • 12.1 Maintaining
      • 12.1.1 Routine (to be carried out regularly)
        • 12.1.1.1 Inspecting the cables
      • 12.1.2 Extraordinary (to be done only under particular circumstances)
    • 12.2 Cleaning
      • 12.2.1 Routine (to be carried out regularly)
        • 12.2.1.1 Cleaning the glass
        • 12.2.1.2 Germanium glass window cleaning
        • 12.2.1.3 Cleaning the device
  • 13 Disposal of waste materials
  • 14 Troubleshooting
  • 15 Technical data
    • 15.1 NXPTZ
      • 15.1.1 General
      • 15.1.2 Mechanical
      • 15.1.3 Electrical/Video
      • 15.1.4 Communications
      • 15.1.5 Protocols
      • 15.1.6 Environment
      • 15.1.7 Certifications
    • 15.2 NXPTZT
      • 15.2.1 General
      • 15.2.2 Mechanical
      • 15.2.3 Electrical/Video
      • 15.2.4 Communications
      • 15.2.5 Protocols
      • 15.2.6 Environment
      • 15.2.7 Certifications
  • 16 Technical drawings