MagTek USB MagneSafe Swipe and Insert Reader V5 - Manual (Page 10)

USB MagneSafe V5 Swipe and Insert Reader
2
FEATURES
Major features of the Readers are as follows:
•
Wired model and wireless model dongle powered through the USB – no external power
supply required
•
Wireless model reader is powered by a rechargeable battery; recharging can be provided via
a standard USB cable (for recharging only)
•
Hardware Compatible with a PC or any computer or terminal having a USB interface
•
Bi-directional card reading
•
Reads encoded data that meets ANSI/ISO/AAMVA standards and some custom formats such
as ISO track 1 format on track 2 or 3
•
Reads up to three tracks of card data
•
Secure Red/Green/Amber LED for status
•
Compatible with USB specification Revision 1.1
•
Compatible with HID specification Version 1.1
•
Can use standard Windows HID driver for communications; no third party device driver is
required
•
Programmable USB serial number descriptor
•
Programmable USB Interrupt In Endpoint polling interval
•
Programmable Keyboard Table to support alternate languages
•
Non-volatile memory for property storage
•
Built-in 6 foot USB cable on some models; other models include USB 5-pin mini-B
connector
•
Supplies 54 byte MagnePrint™ value
•
Contains a unique, non-changeable serial number which allows tracking each reader
•
Encrypts all track data and the MagnePrint value
•
Provides clear text confirmation data including card holder’s name, expiration date, and a
portion of the PAN as part of the Masked Track Data
•
Mutual Authentication Mode for use with Magensa.net