MagTek USB MagneSafe Swipe and Insert Reader V5 - Manual (Page 13)

Section 1. Features and Specifications
5
SPECIFICATIONS
Table 1-2 lists the specifications for the USB MagneSafe Readers.
Table 1-2. Specifications
Reference Standards ISO 7810 and ISO 7811/ AAMVA*
Power Input 5V from USB bus
Recording Method Two-frequency coherent phase (F2F)
Message Format ASCII
Card Speed 4 to 60 ips (10.1 to 152.4 cm/s)
ELECTRICAL
Current
Normal Mode
Suspend Mode
100mA maximum
500uA maximum
MECHANICAL - FULL SIZE
Dimensions
Length 6.50” (165.1mm)
Width
1.74” (44.2mm)
Height 1.50” (38.1mm)
Weight 6.8 oz. (192.7 gr)
Cable length 6 ft.
Connector USB Type A plug
MECHANICAL – Mini
Dimensions
Length 3.94” (100.0mm)
Width 1.28” (32.5mm)
Height 1.23” (31.3mm)
Weight 4.7 oz. (133.2 gr)
Cable length 6 ft.
Connector USB Type A plug
MECHANICAL – P55
Dimensions
Length 2.08” (52.83mm)
Width
1.13” (28.70mm)
Height 1.21” (30.73mm)
Weight 1.3 oz. (36.9 gr)
Connector USB Mini B 5-pin
MECHANICAL – P90
Dimensions
Length 3.49” (88.5mm)
Width
1.02” (25.91mm)
Height 1.00” (25.4mm)
Weight 1.2 oz. (34.0 gr)
Connector USB Mini B 5-pin
MECHANICAL – Insert
Dimensions
Length 4.66” (118.4mm)
Width
2.56” (65.02mm)
Height 1.01” (25.65mm)
Weight 1.2 oz. (34.0 gr)
Connector USB Mini B 5-pin
ENVIRONMENTAL
Temperature
Operating -30 °C to 70 °C (-22
o
F to 158
o
F)
Storage -40
o
C to 70
o
C (-40
o
F to 158
o
F)
Humidity
Operating 10% to 90% noncondensing
Storage 10% to 90% noncondensing
* ISO (International Standards Organization) and AAMVA (American Association of Motor Vehicle
Administrators).