MagTek USB MagnePrint Swipe Reader with Encryption - Manual (Page 17)

Section 2. Installation
9
Figure 2-2. Mounting Hole Dimensions
2.
Ensure the Reader is positioned on a flat, accessible surface with at least 4 inches clearance on
either end for room to swipe a card. Orient the Reader so the side with the LED is facing the
direction of intended use.
If fastening tape is to be used, clean the area that the Reader will be mounted on with isopropyl
alcohol. Remove the adhesive protective cover on the fastening tape, and position the Reader and
push down firmly.
3.
Mount the Reader.