MagTek IntelliStripe65 99875141 - Manual (Page 16)

IntelliStripe 65, RS232 Insertion Reader
8
Front Flange
Two molded flanges toward the front of the chassis connect the Reader by four threaded studs,
nuts, and washers as shown in Figures 2-1 and 2-2. The International Bezel is used with the
Front Flange.
Side Mounting Studs
There are four molded studs. Two are located on each side of the chassis. The North American
Bezel is used with side mounting studs. Optional threaded inserts can be inserted in both ends of
the studs and used with imperial screws, as indicated in Figures 2-1 and 2-2.
Side Mounting Holes
Four molded holes are available when studs are not provided. Holes are positioned inline with
the centerline of the stud with molded nut retaining features, as shown in Figures 2-1 and 2-2.
Figure 2-1. Chassis Mounting Features