MagTek MT-215232 RS-232 - Manual (Page 10)

MT-215232 Insertion Reader
4
SPECIFICATIONS
Table 1-1 lists the specifications for the RS-232 Insertion Reader.
Table 1-1. Specifications
OPERATING
Reference Standards ANSI/ISO
Power Input +5V DC - Requires +4.75 V DC to +5.25 V DC @ 0.045 A
Power Consumption 0.225 WATTS
Auxiliary Drivers 1 and 2 Open Collector outputs, capable of driving visual indicators, solenoids,
relays, etc. Outputs driven by Texas Instruments ULN 2003AN. Any
use of these drivers must meet the following: ON = 0.8V @ 0.2 amps
max. OFF = 50.0V max. (See Texas Instruments Data Sheet for
parameters.)
Interface Signal RS-232E
Message Format ASCII (7 Data Bits + Parity Bit)
Track Card Speed TRK 1 or 3: 3 to 50 IPS (127 cm) at 210 BPI.
TRK 2: 3 to 50 IPS (127 cm) at 75 BPI
MTBF Electronics: 120,000 hours
Head: 1,000,000 passes (500,000 insertion cycles)
MECHANICAL
Dimensions (with Bezel)
Length
Width
Height
Bezel Thickness
4.58 “ (11.63cm)
4” (10.16 cm)
3” (7.62 cm)
0.31” (0.79 cm)
Weight 5.42 oz. (154 g.)
ENVIRONMENTAL
Temperature
Operating
0
o
C to 70
o
C (32
o
F to 158
o
F)
Storage -40 o C to 80 o C (-40 o F to 176 o F)
Humidity
Operating 10% to 90% noncondensing
Storage 0% to 100% noncondensing
Altitude
Operating 0-10,000 ft. (0-3,048 m.)
Storage 0-50,000 ft. (0-15,240 m.)