MagTek MT-215232 RS-232 - Manual (Page 7)

1
stripe card reader, which reads single or
ual tracks of alphanumeric or numeric data in formats established by the credit card industry.
nal computers or any computer
ith an RS-232 interface. The MT-215 will read cards that meet the standards defined by ISO
card is inserted all the way into the reader and withdrawn with a steady motion. A read
tocol including baud rate, parity, and
aming characters. The switches also select buffered and unbuffered modes of operation and
nd selection from the Host to the Reader.
2 interface.
r unbuffered modes of operation
te
On/off switches for STX (Start of Text), ETX (End of Text), and ESC (ESCAPE) framing
ing insertion and removal of card
•
Two auxiliary drivers for Reader status, or to actuate devices such as solenoids, or relays
SECTION 1. FEATURES AND SPECIFICATIONS
The Model MT-215232 Insertion Reader is a magnetic
d
For AAMVA and CDL, the Reader reads track 2 only.
The Reader is compatible with the PC AT/PS2 series of perso
w
7810, 7811-1, 7811-2, 7811-3, 7811-4, 7811-5, and 7811-6.
A
attempt is made during insertion and removal of the card.
Two blocks of eight switches each select the RS-232 pro
fr
enable comma
FEATURES
Major features of the Insertion Reader are as follows:
•
Hardware compatible with PC or any computer with an RS-23
•
Switch selectable buffered o
•
Switch selectable baud ra
•
Switch selectable parity
•
characters.
•
On/off switch for CR (Carriage Return)
•
Magnetic stripe read dur
•
ASCII message format